Aidetek 60W 12-in-1 adjustable Welder soldering Iron Kit Welding Tool 5pcs Soldering Tips Desoldering Pump copper wire solder wire rosin tweezers iron stand brush Soldering Kit Carry Bag SPB1

商品説明

60W adjustable thermoelectric iron, tube length 5cm (2 inches), the tip of the protruding part of the 1.7cm (3/4 inch), power cord length 150cm (59 inches).
60W adjustable thermoelectric iron rapid heating (1-2 minutes). 60W adjustable temperature soldering iron temperature adjustment range 200 ℃ -450 ℃ (392 ℉ -842 ℉). Welding tools designed to upgrade heat-resistant materials and steel pipes 4 ventilation holes help to dissipate heat.

How to solder:
1. The first time to use iron, it will come out from the tip of smoke. The smoke will disappear in a short time, the smoke will never appear again.
2. Prepare solder and soldering iron. In particular, the tip must be kept clean, where the solder should be coated.
3. When soldering, when the tip is covered with oxide and black, you need to rub in the rosin rub, and use solder wire to it on the tin, to keep the tip of the tip of the 1 / 4--1 / 2 area is Bright on tin state.
4. Use soldering iron to heat the welding parts, such as PCB wires and pads, and keep the iron evenly heated.
5. When the temperature is high enough, place the wire at the joint and the solder will melt and flow freely.
6. Do not pull out the tip and use it in this way, which will shorten the service life of the heating element.
7. During soldering iron is connected to power, it should be placed on the electric iron frame, do not mess up, so as to avoid accidents. After turning off power, it should be fully cooled after around 20 minutes.

60W adjustable thermoelectric iron technical parameters
Operating voltage 110V / 60HZ
Maximum power: 60W
In normal operation, 60W adjustable temperature soldering iron temperature adjustment range 200 ℃ -450 ℃ (392 ℉ -842 ℉)