12-pack G24 to E27 Adapter, 21.8mm, 2p, E-simpo® G24d to E26 Lamp Base Converter, Rohs.Z1003 [並行輸入品]
特記事項
- 新品、並行輸入品です。Brand new parallel imports from the US.
- 12pcs/lot, Suit for G24D-1,G24D-2,G24D-3, 2pin socket, Need BYPASS OR REMOVE the ballast, otherwise, it doesn't light on.
- 2p is in cross, not in parallel (that is G23 2P in Paralle),G24D Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter-D series has a Higher tip(21.8mm) than Q series(15.5mm).Please double check before you buy.
- Physically change the contact, don't change voltage. If you don't know how to remove or don't plan to ask an electrician to remove the ballast, please DO NOT BUY!THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.
- All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.
