Instapark IN02A Stand-alone Motion Detector Alarm and Chime with Keypad [並行輸入品]

商品説明

Powered by 3 readily-available and commonly-used AAA batteries(included), the Instapark IN02A PIR (Passive Infrared) motion detector with alarm is a must-have, simple, convenient, inexpensive, yet effective device for security and protection at your home, garage, shop, office, and etc. Featuring a long-range and wide-angle PIR sensor, and 2-mode selection, the IN02A can detect motion from as far as 20 feet away and act according to your mode selection, chime or alarm. To arm or disarm the alarm, simply enter your pre-programmed code. Once armed, there will be a 30-second exit delay for you to leave the area without triggering the alarm. Upon returning, there's also 10-second entry delay for you to disarm the alarm after the motion sensor is activated, otherwise a powerful, deafening siren will go off and last 30 seconds to warn the would-be intruder, afterwards the detector will reset itself and enter the detection mode again.

Installing the IN02A could not be easier, no wiring is required, no contractors to hire, you may just place it on a flat surface, such as a desk or table, or mount the included articulating bracket onto a wall, then snap the motion detector on the bracket securely. Better yet, the bracket tilts, swivels, and rotates to various angles to optimize the detection coverage.

Specifications:

Power source: AAA x 3 (included)
Detector type: PIR (Passive Infrared)
Detection Range: 20 feet
Detection coverage:
- Vertical: 70 degrees
- Horizontal: 110 degrees
Battery low indication: Yes
Exit delay: 30 seconds
Entry delay: 10 seconds
Dimensions: 5 ? x 2 ? X 1 ? inches
Weight: 3.8 oz (without batteries)

What's in the box:

IN02A motion detector alarm
AAA battery: 3
Mounting bracket
Drywall anchors: 2
Screws: 2
User manual
Warranty registration