Podoy Dc41 Dc65 Filter Replacement for Dyson Vacuum Cleaner HEAP Post Filter Part 920769-01

商品説明

Compatibility
All Dyson DC41 DC65 DC66 Models, including DC41 Animal, DC41 Animal Complete, DC41 Animal Complete Exclusive, DC41 Animal Exclusive, DC41 Animal Plus, DC41 Multi Floor Exclusive, DC65 Animal, DC65 Animal Complete, DC65 Animal Complete Exclusive, DC65 Animal Total Clean, DC65 Multi Floor, DC65 Multi Floor, DC65 Multi Floor.
How to wash the filter.
Step 1: Remove the clear bin from the machine by pressing the cyclone release catch as shown.
Step 2: To remove Post HEPA Filter recline the machine on its back and turn the central locking dial on the outer cover of the ball anti-clockwise until the cover is released.
Step 3: Lift off the cover and turn the filter one-quarter anti-clockwise to release.
Step 4: Wash the Post HEPA Filter in cold water only (please do not use detergent, do not wash in a dishwasher or washing machine).Repeat the steps shown below until the water runs clear.Post HEPA Filter should be rinsed and tapped out until the water runs clear, then tapped out again to ensure all excess water is removed.This will normally require up to 10 rinses.
Step 5: Leave the filter to dry in a warm place for 24 hours, until completely dry.(Do not dry the filter in a tumble dryer, microwave or near a naked flame.)