FT232RL FT232 USB 3.3V 5V to TTL Serial Adapter Module FT232RL USB for Arduino
- メーカー
- UMKTOKYO
- JAN
- 0696761446418
- この商品のレビュー
- Amazonでのレビュー
- シェア
商品説明
FT232RL FT232 USB 3.3V 5V to TTL Serial Adapter Module FT232RL USB for Arduino
Description:
The FT232 USB UART Board (Type A) is an accessory board that features a USB-to-UART serial convertor
FT232, USB Type A connector, and 3 LEDs: TXD LED, RXD LED, POWER LED.
There is also a jumper used for selecting VCC output level provided on the board:
*Short the jumper to select output voltage level as 5V or 3.3V. In this case, the accessory board is
powered from USB connection and provides power to the target application board
*If the jumper is open, the accessory board should be powered from the target application board (3.3V-5V)
The TXD, RXD, RTS#, and CTS# are connected to the onboard soldered pinheaders, while the other pins are
accessable on the drill holes, separate pinheaders (40-pin male & 40-pin female) are also provided.
Features:
FT232, USB type A connector, UART interface, VCC output level selection jumper
Package included:
1 × FT232 USB UART Board (type A)
特記事項
- The FT232 USB UART Board (Type A) is an accessory board that features a USB-to-UART serial convertor FT232, USB Type A connector, and 3 LEDs: TXD LED, RXD LED, POWER LED.
- There is also a jumper used for selecting VCC output level provided on the board:
- *Short the jumper to select output voltage level as 5V or 3.3V. In this case, the accessory board is
powered from USB connection and provides power to the target application board - *If the jumper is open, the accessory board should be powered from the target application board (3.3V-5V)
- 弊社の商品は香港からの発送となります。配送１件ごと（商品数問わず）配送料は１回いただきます。普段は国際郵便小包（追跡番号付き）を利用して、お届けまで１～３週間程度かかります。但し、ご注文5000円以上の場合はエクスプレスにて発送いたします、３～５勤務日程度でお届けできます。
